FL5 F1 Exhaust System

[tibwolf]

This one?

https://www.civicxi.com/forum/threa...aust-videos-with-soundclips.52108/post-895686

https://www.boostlogic.com/product/boost-logic-civic-type-r-titanium-exhaust-fl5/

Yep, that looks like the one. I almost bought one for cheap because the original owner couldn’t stand it while commuting but then I got out of the FK8 platform. Bullet dodged I guess.

Sponsored

 

[a c i d.f l y]

This one?

https://www.civicxi.com/forum/threa...aust-videos-with-soundclips.52108/post-895686

https://www.boostlogic.com/product/boost-logic-civic-type-r-titanium-exhaust-fl5/

Straight through fat pipes. That sounds awful at idle. A little muffler+resonator goes a long way.

 

[JoeyCoke]

I actually think this is one of the valved exhausts that actually get quiet when the valve is closed, and loud when the valve is opened. It even sounds okay when the valve is open. It also comes in stainless steel either through AeroflowDynamics (AD) or through Alibaba if the Ti is too risky, I can't remember.

The things that prevented me from pulling the trigger on it was just lack of others buying it, it being an Alibaba exhaust, and also the amount of negative experiences people have had with AD (Reddit and other forums).

yea now im leaning towards the Miltek but people say the welds are bad are its too loud but on the other hand people are saying the welds on the AWE are bad but also better then the Miltek. also seen 2-3 people with videos showing the AWE making a very strange noise in the lowerer rpms. choosing an proper exhaust is very difficult. not like a 50$ shifter knob u cant just remove if you dont like lol

 

[naafl5]

yea now im leaning towards the Miltek but people say the welds are bad are its too loud but on the other hand people are saying the welds on the AWE are bad but also better then the Miltek. also seen 2-3 people with videos showing the AWE making a very strange noise in the lowerer rpms. choosing an proper exhaust is very difficult. not like a 50$ shifter knob u cant just remove if you dont like lol

Welcome to the club, where there are tons of options but they’re all shit.

 

[SKINNIE]

yea now im leaning towards the Miltek but people say the welds are bad are its too loud but on the other hand people are saying the welds on the AWE are bad but also better then the Miltek. also seen 2-3 people with videos showing the AWE making a very strange noise in the lowerer rpms. choosing an proper exhaust is very difficult. not like a 50$ shifter knob u cant just remove if you dont like lol

I've seen some of the welds on the Milltek. Some were good others were bad. AWE on the other hand. Their shit looks like someone from a mom and pop muffler shop on the corner somewhere welded it.

 

[Jester04]

yea now im leaning towards the Miltek but people say the welds are bad are its too loud but on the other hand people are saying the welds on the AWE are bad but also better then the Miltek. also seen 2-3 people with videos showing the AWE making a very strange noise in the lowerer rpms. choosing an proper exhaust is very difficult. not like a 50$ shifter knob u cant just remove if you dont like lol

Remark is a solid option with flanges and quality.

 

[MERAKIAUTOWORKS]

Welcome to the club, where there are tons of options but they’re all shit.

Apexi and Remark have incredible quality, I ran them on mine.

-Josh

 

[egxflash]

I've seen some of the welds on the Milltek. Some were good others were bad. AWE on the other hand. Their shit looks like someone from a mom and pop muffler shop on the corner somewhere welded it.

someone from AWE is on the DE5 forums right now pushing their exhaust. I found it odd she kept insisting the valve doesn't make a difference in sound though.

I've got a valved exhaust and it absolutely quiets it down when I put it in comfort mode while driving the wife around.

 

[Two Step Performance]

yea now im leaning towards the Miltek but people say the welds are bad are its too loud but on the other hand people are saying the welds on the AWE are bad but also better then the Miltek. also seen 2-3 people with videos showing the AWE making a very strange noise in the lowerer rpms. choosing an proper exhaust is very difficult. not like a 50$ shifter knob u cant just remove if you dont like lol

We have not had any complaints from our Milltek customers. That is what I run on my personal FL5. The biggest recommendation I can make is that if you have an aftermarket downpipe I strongly recommended a resonated option from Milltek. I'm also a big of the valve and will not let it go.

 

[Websitesdown]

We have not had any complaints from our Milltek customers. That is what I run on my personal FL5. The biggest recommendation I can make is that if you have an aftermarket downpipe I strongly recommended a resonated option from Milltek. I'm also a big of the valve and will not let it go.

Link to the resonated please.

 

[Two Step Performance]

Link to the resonated please.

https://www.twostepperformance.com/...k-systems?currency=USD&variant=41397703180420

^ This is the same one on my car.

 

[Websitesdown]

https://www.twostepperformance.com/...k-systems?currency=USD&variant=41397703180420

^ This is the same one on my car.

Thank you. I'm going to get one no doubt. I'm getting my front windshield tinted next week " already did the sides and back". Then my ECU chipped in another four weeks / tune through you guys through drob. Then exhaust / intake upgrades. Then more fine tuning through drob no doubt. Appreciate you guys!

 

[Two Step Performance]

Thank you. I'm going to get one no doubt. I'm getting my front windshield tinted next week " already did the sides and back". Then my ECU chipped in another four weeks / tune through you guys through drob. Then exhaust / intake upgrades. Then more fine tuning through drob no doubt. Appreciate you guys!

We appreciate you as well! We look forward to seeing your build progress.

 

[JoeyCoke]

Remark is a solid option with flanges and quality.

It looks great. In fact really nice just not a fan of the sound.

We have not had any complaints from our Milltek customers. That is what I run on my personal FL5. The biggest recommendation I can make is that if you have an aftermarket downpipe I strongly recommended a resonated option from Milltek. I'm also a big of the valve and will not let it go.

do i need a downpipe if i ever decide to do a tune on the car?

 

[Two Step Performance]

It looks great. In fact really nice just not a fan of the sound.

do i need a downpipe if i ever decide to do a tune on the car?

A downpipe upgrade is not required for tuning but it makes more of a performance difference than any other bolt on part short of a turbocharger upgrade so we do typically recommend them strongly. You can absolutely tune without one though.

Sponsored