Official Wheel Fitment Thread for 11th Gen FL5 Civic Type R

[abellp]

18x9.5 + 45 Advan RSIII 265/35/r18 (lowered on FL5 swift springs). Shout out to Tony at @System Motorsports

Sponsored

 

[System Motorsports]

18x9.5 + 45 Advan RSIII 265/35/r18 (lowered on FL5 swift springs). Shout out to Tony at @System Motorsports

Looking awesome Abel!

 

[johnny_F8]

18x9.5 + 45 Advan RSIII 265/35/r18 (lowered on FL5 swift springs). Shout out to Tony at @System Motorsports

looks great! Is +45 offset still flush after lowering it? I also have this but not lowered yet and think that +45 is flush and if I lower it might tuck it that I need to buy a +38, LOL... Also how much ground clearance you have left with your front lip installed? 4-5 inches maybe? undecided on the lip due to potential scraping when I lower my car. Thank you!

 

[abellp]

looks great! Is +45 offset still flush after lowering it? I also have this but not lowered yet and think that +45 is flush and if I lower it might tuck it that I need to buy a +38, LOL... Also how much ground clearance you have left with your front lip installed? 4-5 inches maybe? undecided on the lip due to potential scraping when I lower my car. Thank you!

thanks man! It's flush (you won't rub) Lip yea, I would say about 3-4 inches. However the aeroflow dynamics lip is temporary as I picked up the Adro lip

 

[TchnoZ33]

thanks man! It's flush (you won't rub) Lip yea, I would say about 3-4 inches. However the aeroflow dynamics lip is temporary as I picked up the Adro lip

What site did you end up going with for the Adro lip? Did they tell you how long it may take to come in?

 

[lmtlsauto]

18x10.0 +40 ZE40 M-Spec

 

[Websitesdown]

What wheels are made for our cars that don't need adapters and or hub centric rings, to fit?

 

[walnut]

What wheels are made for our cars that don't need adapters and or hub centric rings, to fit?

apexwheels has some options with 5x120 bolt pattern and 64.1mm center bore size, so you shouldn't need any adapters or hub centric rings for those

 

[Websitesdown]

apexwheels has some options with 5x120 bolt pattern and 64.1mm center bore size, so you shouldn't need any adapters or hub centric rings for those

Yeah, I just feel like if I'm paying 3k+ murica dollars I shouldn't have to buy adapters as I don't really think that makes sense. I don't understand why there isn't more normal here, slap them on options honestly.

 

[svvitch]

Yeah, I just feel like if I'm paying 3k+ murica dollars I shouldn't have to buy adapters as I don't really think that makes sense. I don't understand why there isn't more normal here, slap them on options honestly.

I agree but there are so many nice wheels that need rings. I have 67.1 to 64.1 rings - so thin. They stay in place thankfully when I pull the wheels off.

 

[Vrstxnce]

Will this spec fit the car without modifications 18x10 +22

 

[abellp]

What site did you end up going with for the Adro lip? Did they tell you how long it may take to come in?

I went with adro. end of Nov

 

[BC504]

Will this spec fit the car without modifications 18x10 +22

How low are you/do you plan to go? There's a few people with x10 +24 and 25, just toss some slightly stretched tires and camber on it and go.

 

[ELIAS64]

Advan GT Beyond 19x9.5 +45
Falken Azenis RT660 275-30-19
Muteki Hub Centric Ring Set 72.6mm / 64.1mm
Lowered 1” front/back on Swift Springs

11 more photos…

Advan GT Beyond 19x9.5 +45
Falken Azenis RT660 275-30-19
Muteki Hub Centric Ring Set 72.6mm / 64.1mm
Lowered 1” front/back on Swift Springs

11 more photos…

 

[ItsMeNickG]

Does anyone here that’s lowered run a 18x9.5 +35 wheel with a 275/35 tire? Just curious…

Sponsored