slender_fe1
Member
- Joined
- Nov 16, 2023
- Threads
- 4
- Messages
- 18
- Reaction score
- 7
- Location
- Tulsa, Oklahoma
- Vehicle(s)
- 2023 civic si
does anyone know the canadian si dash part number?
Sponsored
Hi everyone - wanted to update the group! Happy Saturday as well, I know it is not as cold here in Michigan as it once was.There's a different wiring harness from the wheel to the clockspring (the part number listed was inexpensive) , but I'm not sure if that connects correctly to the clockspring.
dude ! that is clean asf!Hi everyone - wanted to update the group! Happy Saturday as well, I know it is not as cold here in Michigan as it once was.
So, as you know this thread is about adding the FL5 cluster into the '2024 Si I have some statics to help put if this is a route you want to go.
My used Type-R steering wheel came in. I tested it quick so I could use the wheel controls and found out the cluster now has 100% controllability! I since the wheel was slightly more warn I used my Si wheel. This is how I got it to all work.
1.) You have to use the small wiring harness from the type are wheel and controls and swap them over to the SI steering wheel.
2.) Mileage stays with the cluster not the ECU
3.) I ordered the center switch bank with the "R-mode" button, I am hoping this allows the cluster to go into the race-dash mode. It will take a few weeks to get it.
I am SO very happy with this cluster. I love a full digital cluster as it really cleans up the area. The yellow digital needles are a nice touch too. If the R-Mode" works after swapping the switch bank, that will complete my journey on the up swing.
I took photo's of all the screen options we in the USA don't have on our SI's.
Please do remember that the explanation point circled in orange will be on the cluster as we do not have the ADS system on our cars. Not sure if that will ever be able to be turned off.
Thanks for following : )
![]()
![]()
![]()
Thank you! It is going well so far. I will have the selector switched delivered this Saturday per <USPS>. I also already added 1 door panel from a Type-R, so I will have the illuminated applique. I am adding the floor lighting too (our SI's actually have the provision for the Type-R ambient lighting).dude ! that is clean asf!
so, i see you mentioned the mileage stays on the cluster not the ECU. How would you get it reprogrammed to get the correct mileage on the cluster?Thank you! It is going well so far. I will have the selector switched delivered this Saturday per <USPS>. I also already added 1 door panel from a Type-R, so I will have the illuminated applique. I am adding the floor lighting too (our SI's actually have the provision for the Type-R ambient lighting).
I am sure you can go to the dealer. I just wrote down that I had 1511 miles on my SI cluster and I purchase the Type-R cluster with 674 miles.so, i see you mentioned the mileage stays on the cluster not the ECU. How would you get it reprogrammed to get the correct mileage on the cluster?
that 200 MPH on the dash goes crazy lol can you make a video of the start up of the dash?I am sure you can go to the dealer. I just wrote down that I had 1511 miles on my SI cluster and I purchase the Type-R cluster with 674 miles.
YOU will have no problem swapping in a Type R or Type S gauge cluster, because you have a car with ADS. A U.S. model Si owner could use the gauge cluster from a Base or A-Spec Integra, or a Canadian Si to get a full digital cluster.I am starting to get cold feet on a Type S that is being delivered in April and started fantasizing modifying my ASPEC 6speed with OEM+ upgrades. Looked at my email and see you have my thoughts exactly. Now I am really wondering if the cluster in an Integra will have the ADS issue or not... CTR seats would be interesting as well.