Aftermarket Seat - Air Bag (SRS) Canceller

[ItsMeNickG]

Hello, just looking for some help as the instructions that come with the Recaro seat bracket/rail aren’t really clear (to me)… I’ve honestly never had an aftermarket seat setup before .

Can someone show me what wire this hooks up to and how it’s done?

Also, I don’t have my bucket seat in the car full time, so is this something I’d remove when I put my OEM seat back?

Sponsored

 

[Clark_Kent]

@phothrottle may be able to help. I know he has BRIDE seats in his FL5.

 

[Jester04]

Hello, just looking for some help as the instructions that come with the Recaro seat bracket/rail aren’t really clear (to me)… I’ve honestly never had an aftermarket seat setup before .

Can someone show me what wire this hooks up to and how it’s done?

Also, I don’t have my bucket seat in the car full time, so is this something I’d remove when I put my OEM seat back?

Best bet would be to make a small harness to plug into the factory connector so you can swap out quickly as needed. You will need the right resistance to not get it to throw the light.

 

[phothrottle]

Hello, just looking for some help as the instructions that come with the Recaro seat bracket/rail aren’t really clear (to me)… I’ve honestly never had an aftermarket seat setup before .

Can someone show me what wire this hooks up to and how it’s done?

Also, I don’t have my bucket seat in the car full time, so is this something I’d remove when I put my OEM seat back?

You will need to tap into the airbag wires
Blue wire and green wire for driverside
Pink wire and green wire for the passenger side

 

[ItsMeNickG]

You will need to tap into the airbag wires
Blue wire and green wire for driverside
Pink wire and green wire for the passenger side

Thank you!

 

[Two Step Performance]

Please be aware that this is not all you need to avoid an SRS error light after a seat change. The weight sensors have to be transferred over and possibly calibrated.

Sponsored