Genesis Coupe Brembo 11th Gen Civic Wheel Clearance Help!

[Canuoe]

Hey everyone,
Was wondering if anyone has done this swap on the 11th Gen civic yet. I kind of dove head first into this and bought a set basing my research off the forum threads for the 10th Gen. Everything bolts right up and I gotten all the correct equipment. The issue I am having is the wheel clearance, I'm currently rocking the RPF1s 18x9.5 +38 and I was hoping it would clear and if not I would run a 5mm spacer, but I had no luck with both. Does anyone have any wheel suggestions that would fit this DIY kit? I was looking at the Evo 10 (Non-BBS) wheel as the face is slightly concave to give me more clearance or the Wedsports 105TCX in 18x9.5 +38, would that be able to clear it? Any input would be appreciated, Thanks in advance!

Sponsored

 

[TchnoZ33]

https://www.civicxi.com/forum/threads/genesis-brembo-w-nissan-rogue-3-seat-rotors.51974/

?

 

[Canuoe]

https://www.civicxi.com/forum/threads/genesis-brembo-w-nissan-rogue-3-seat-rotors.51974/

?

Thanks, but I’m looking for the wheel clearances. I got everything to work caliper and rotors wise.

 

[SGPkaz]

Following.
Have pics of the brakes? First time hearing of this retrofit

 

[Two Step Performance]

Hey everyone,
Was wondering if anyone has done this swap on the 11th Gen civic yet. I kind of dove head first into this and bought a set basing my research off the forum threads for the 10th Gen. Everything bolts right up and I gotten all the correct equipment. The issue I am having is the wheel clearance, I'm currently rocking the RPF1s 18x9.5 +38 and I was hoping it would clear and if not I would run a 5mm spacer, but I had no luck with both. Does anyone have any wheel suggestions that would fit this DIY kit? I was looking at the Evo 10 (Non-BBS) wheel as the face is slightly concave to give me more clearance or the Wedsports 105TCX in 18x9.5 +38, would that be able to clear it? Any input would be appreciated, Thanks in advance!

I went through this about 8 years ago on my 10th gen Si. The GenCoupe Brembos are nice but trying to fit wheels over them is a bit of a nightmare. I too had a set of RPF1s that wouldn't work. I ended up settling on a set from Konig + spacers but I unfortunately do not recall exactly which style they were.

Sponsored