Search results

How much can you do on one with carbon tips? I have anf fl5 with fbo for testing if need it

You can Buy a used set for Around 300. Find a local honda dismnantler

Thank you soo much, You were really Helpful I appreciated a lot. 🙏 The Misfire P0304 code has being fixed and the problem was the Injector. I never thought a New Injector Will fail. Car only had 7k miles and according to XDI, debris could had gone inside the injector causing it to stuck open...

My issue is getting worst.. lol I have 3 cylinder misfire now I reflashed the tune but before that I uploaded the newest Hondata version 4.3.3.0. To my laptop. I did noticed My hondata firmware didn't upgrade still upload version 4.3.1.0. Hondata says there is no problem if firmware is not...

Yes I cleared the codes 3 times. I'll re-upload the tune again tonight.

I had put around 30 psi on intake system and no leaks mostlikely the injector is not working properly. Quote: Injectors on the car are XDI new, the car had some Used Xdi before and had no issues. I'm think I do have some fail injectors. According to the tuner the fuel pump is working good.

That's more likely normal, my rough idle last at least a minute to two

I'm happy for you, hopefully your issue don't comeback. I'm reflash My tune too just in case and do the air pressure test today, if my problem don't go away I'll take it to the mechanic.. lol

I really appreciate it, Thank you soo much 🙏

Thank you

Damm the sucks, I don't want to do that I'll try doing a pressure test, smoke test didn't do the job. Good luck

Thank you Thank you soo much your info is really helpful. Do you have another picture covering the area of the throttle body there is more hoses there too. Yeah the one of the manifold was connected to the catch can but I already put it back to the valve cover. Thank you for your help

I'll be doing a pressure test once I get the tools. Do you happen to have an R? If so can you send me a picture of the hoses around the manifold. I'll like to check if hoses are connected on the right place. TIA

I ended removing the oil catch can just in case but No luck. I'll check the coupler thank you

Pepo Bebosa from Red Star

Codes came after Injectors and Valve cover were replaced. I had checked those areas closely and I don't see any leak. I'm thinking that hoses around the manifold were not connected on right spots. Would you happen to share a picture of the manifold area? TIA

Looking for some advice. Thank you I'm having a Misfire at Cold start, engine light starts flashing and idle is rough, after a minute car goes back to normal. I'm getting p0304 Cylinder 4 misfire and P2261 Turbocharger bypass valve A Mechanical, this code takes several miles to come back but...

Sharing My experienced. I finally did the conversion on My FL5, Process was really easy. I think was easy because I had done it on my Fk8 long time ago but definitely was pretty simple. I did used the seats from a 2023 Honda civic hatchback Sport. Regarding the buckle I used this part number...

No I haven't. I do have the seats ready hopefully soon I have the time to do it.

Thank you