Indiana 2024 CW Type R For Sale (SPOON BUILD) - 1,500 MILES - INDIANA

[Hooligan317]

Hello all! Selling my 2024 Championship White FL5 Type R. The car currently lives in my garage in the Indianapolis area with only 1,231 miles on it. I purchased it with the original intent of "keeping forever" and throwing the entire Spoon catalogue at it to scratch some major nostalgia itches that I couldn't afford to scratch when I was younger. Fast forward and while I've built something I really enjoy, the car sits way more than it deserves to and I'm looking to send it to a home that will drive it way more often!

DETAILS:

Year: 2024
Miles: 1,231

Mods:

SPOON PARTS (all parts below are genuine SPOON):
- SW388 wheels (18" - wrapped in 275/38R-18 Bridgestone Potenza RE-71RS)
- lug nuts
- N1 exhaust
- Valve cover
- Kevlar plug cover
- Brake lines F&R
- Rigid collar kit F&R
- Lowering springs
- Carbon fiber hood vent
- Air filter
- Oil cap
- Reservoir sock
- Side mirros
- Rear view mirror
- Shift knob
- Steering wheel
- Oil drain plug (not installed)
- Stiff plate
- STICKERS! (not installed)

NON-SPOON PARTS
- EVS tow hooks (F&R - not installed)
- Sayber Designs carbon fiber front lip
- EVS front camber joints
- PRL rear motor mount
- PRL rear wiper delete
- JQ Werks steering wheel hub
- Girodisc rotors F&R
- Ferodo 3.12 brake pads F&R
- 18" Titan7 TC-5 (black) wrapped in 275/35R-18 Bridgestone Potenza RE-71RS
**The car will also come with the OEM steering wheel, shift knob, and wheels & tires.

The car is mechanically perfect, and aesthetically extremely close to perfect. There is one paint blemish on the front end that I document in the photos. I have a loan on the car with Fifth Third but am flexible on how we handle that regarding payoff and title in-hand depending on how serious you are.

*** I AM ASKING $58,000 ***

If you are serious with your interest, please DM me and we can connect to answer any questions you may have. Happy to provide additional photos, etc.

*Not interested in trades and not looking to part out*

Thanks for taking a look!

(Hard to tell from the photo, but it's smaller than a fingernail)

-Matt

Sponsored

 

[Hooligan317]

Curious what people think about the asking price. Is it reasonable? Lots of views, no real action yet (only been a couple of days lol but patience isn't my thing).

 

[Two Step Performance]

Curious what people think about the asking price. Is it reasonable? Lots of views, no real action yet (only been a couple of days lol but patience isn't my thing).

I'll be honest, it is very difficult to get someone to pay extra for a modified car. You would 110% have better luck parting the car out. Carvana would likely pay close to sticker for an unmodified car right now. I know that is not what you want to hear of course but I think selling this car as is (at your price) is going to be a tough ask, even if it could not be replicated for the same amount of money.

 

[VT Skier]

Ditto. Many buyers would prefer non-modified for the warranty peace of mind.

What about Bring a Trailer?

 

[Tougefl5]

Curious what people think about the asking price. Is it reasonable? Lots of views, no real action yet (only been a couple of days lol but patience isn't my thing).

I hope you will get as much as possible. The reality is your just going to get beat up over the price. As already spoken on bring it back to stock and part out the rest.

 

[west357]

Hello all! Selling my 2024 Championship White FL5 Type R. The car currently lives in my garage in the Indianapolis area with only 1,231 miles on it. I purchased it with the original intent of "keeping forever" and throwing the entire Spoon catalogue at it to scratch some major nostalgia itches that I couldn't afford to scratch when I was younger. Fast forward and while I've built something I really enjoy, the car sits way more than it deserves to and I'm looking to send it to a home that will drive it way more often!

DETAILS:

Year: 2024
Miles: 1,231

Mods:

SPOON PARTS (all parts below are genuine SPOON):
- SW388 wheels (18" - wrapped in 275/38R-18 Bridgestone Potenza RE-71RS)
- lug nuts
- N1 exhaust
- Valve cover
- Kevlar plug cover
- Brake lines F&R
- Rigid collar kit F&R
- Lowering springs
- Carbon fiber hood vent
- Air filter
- Oil cap
- Reservoir sock
- Side mirros
- Rear view mirror
- Shift knob
- Steering wheel
- Oil drain plug (not installed)
- Stiff plate
- STICKERS! (not installed)

NON-SPOON PARTS
- EVS tow hooks (F&R - not installed)
- Sayber Designs carbon fiber front lip
- EVS front camber joints
- PRL rear motor mount
- PRL rear wiper delete
- JQ Werks steering wheel hub
- Girodisc rotors F&R
- Ferodo 3.12 brake pads F&R
- 18" Titan7 TC-5 (black) wrapped in 275/35R-18 Bridgestone Potenza RE-71RS
**The car will also come with the OEM steering wheel, shift knob, and wheels & tires.

The car is mechanically perfect, and aesthetically extremely close to perfect. There is one paint blemish on the front end that I document in the photos. I have a loan on the car with Fifth Third but am flexible on how we handle that regarding payoff and title in-hand depending on how serious you are.

*** I AM ASKING $58,000 ***

If you are serious with your interest, please DM me and we can connect to answer any questions you may have. Happy to provide additional photos, etc.

*Not interested in trades and not looking to part out*

Thanks for taking a look!

(Hard to tell from the photo, but it's smaller than a fingernail)

-Matt

Would you be open to selling any of sets of aftermarket wheels/tires?

 

[Hooligan317]

Would you be open to selling any of sets of aftermarket wheels/tires?

Thanks for asking, but at the moment I'm not looking to do that.

 

[sloowpoke]

looks clean and tasteful mods! The spoon hood vent is on my list For next purchases.

 

[Hooligan317]

looks clean and tasteful mods! The spoon hood vent is on my list For next purchases.

Thank you!

 

[Cueyo]

Is the installation cost too much for you to part out? I would definitely be interested in some of the stuff you have.

I know for some people the amount it cost to have work done, in addition to also not having the original parts, is a big reason they don't de-mod a vehicle. It was the case for me with the bushings and ball joints in my last car

Sponsored